series am4 tw-r vz 4 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 13.b 1 of 3 north america only features: models single output models dual output model input voltage (v) output voltage (v) output current max (ma) capacitive load, max (f) efficiency (%) am4 tw - 2405d - rvz 9 - 36 5 400 470 70 am4 tw - 2412d - rvz 9 - 36 1 2 166 100 7 2 am4 tw - 2415d - rvz 9 - 36 15 1 33 68 7 5 am4tw - 4805d - rvz 18 - 72 5 400 470 7 0 am4tw - 4812d - rvz 18 - 72 12 166 100 7 2 am4tw - 4815d - rvz 18 - 72 15 1 33 68 7 3 i nput specifications parameters nominal typical maximum units voltage range 24 9 - 36 vdc 48 18 - 72 filter (pi) network start up time 20 ms peak input voltage time 15 ms absolute max rating 24 vin - 0.7 - 40 vdc isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec 1500 vdc resistance > 1000 mohm capacitan ce 60 pf output specifications parameters conditions typical maximum units voltage balance balanced load 1 % voltage accuracy 1 % short circuit protection continuous short circuit restart auto recovery line voltage regulation 0.5 % load voltage regulation 0.5 % temperature coefficient 0.02 %/ o c ripple & noise at 20mhz bandwidth 60 mv p - p ? wide input range (4:1) ? operating temperature - 40 o c to + 85 o c ? 2 4 pin d ip package ? input / output isolation 1 5 00 vdc ? metal package ? pin comp a t i ble with multiple manufacturers ? high efficiency up to 75 % ? continuous short circuit protection model input voltage (v) output voltage (v) output current max (ma) capacitive load, max ( f) efficiency (%) am4 tw - 2403s - rvz 9 - 36 3.3 1000 1000 66 am4 tw - 2405s - rvz 9 - 36 5 800 1000 7 1 am4tw - 2412s - rvz 9 - 36 12 333 320 74 am4tw - 2415s - rvz 9 - 36 15 266 220 74 am4tw - 4803s - rvz 18-72 3.3 1000 1000 66 am4tw - 4805s - rvz 18 - 72 5 800 1000 72 am4tw - 4812s - rvz 18 - 72 12 333 320 73 am4tw - 4815s - rvz 18 - 72 15 266 220 74
series am4 tw-r vz 4 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 13.b 2 of 3 north america only general specifications parameters conditions typical maximum units s w itching frequency 100% load 100 - 400 khz operating temperature full l oad (see d erating chart) - 40 to +85 o c storage temperature - 40 to +125 o c max case temp era ture 100 o c cooling free air convection humidity 95 % case material nickel coated copper weight 15 g dimensions (l x w x h) tolerance 0.5 mm or 0.02 i nches 1. 25 x 0. 8 x 0. 4 inches 31.75 x 20.32 x 10.16 mm mtbf > 2,200,000 hrs (mil - hdbk - 217f, ground benign, t=+25 o c) safety specifications parameters standards designed to meet iec 60950 - 1 note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. pin out specifications pin 1500 vdc single dual 2 - v input - v input 3 - v input - v input 9 no pin common 11 n.c. - v output 14 +v output +v output 16 - v output common 22 +v input +v input 23 +v input +v input
series am4 tw-r vz 4 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 13.b 3 of 3 north america only dimensions 31.75 (1.25) 20.32 (0.80) 2.54 (0.10) 5.08 (0.20) printed face built-in stand-offs to ease pcb cleaning 10.16 (0.40) 3.05 (0.12) 0.50 (0.02) 15.24 (0.60) 22.86 (0.90) bottom view 2 3 9 11 14 16 22 23 derating 0 25 75 50 85 100 80 60 40 20 0 85 o c safe operating area free air convection ambient temperature o c 100 -40 output power % note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency certifi cations on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal component s and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used i n hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtecs standard terms of sale available at www.aimtec.com.
|
